EN
If you use Kaiqiu DTH hammer for drilling, then you must have encountered something problem. No worries, it happens to the best of them. So here we are with a guide on some of the most common issues that can arise with dth hammers with simple and effective repairs.
What is a DTH Hammer?
Before moving to the problems, let us understand what is DTH hammer and its working. DTH Hammers are tools used to produce holes in the ground. It fractures rock by forcing air pressure on a piston that strikes the drill bit, creating a hole.
Having seen how a DTH hammer works, let’s go through some of the common problems you may find. One such problem is the loss of hammer power. This may occur with a worn piston, or if the air supply supply is blocked. Another issue is a bent drill bit — this can happen if the hammer isn’t properly lined up. And, if you notice funny sounds coming from your hammer — it could indicate there is an underlying issue.
Fixing DTH Hammer Issues
DTH Hammer is a drilling device used in the drilling industry which poses a greater chance of damage if not repaired properly. This is a simple troubleshooting guide to help you in fixing frequent issues with your Kaiqiu dth hammer bit.
Loss of Hammer Power: Daubs air to the hammer indications obtain block, and shift the cylinder if the definite.
Bent Drill Bit: If the drill bit is bent, ensure the hammer is properly aligned and replace the drill bit.
Odd Sounds: Check for damage inside the hammer and replace broken parts.
So these are some simple ways to troubleshoot common dth hammer drilling problems.
How to Maintain Your DTH Hammer?
Care is necessary for the proper functioning of your Kaiqiu DTH hammer. Here are some things that may help you:
Inspect the hammer regularly for wear.
After each use, clean the hammer to remove dirt and debris.
Keep it in a dry location to avoid damage.
If you do, check out our tips for caring for your DTH drill hammer to ensure it runs longer and better every use.
Helping with DTH Hammer Issues
If you face an Kaiqiu DTH hammer issue you can’t address, bringing in some professional help is the best course of action. Our experts at Kaiqiu are available to solve your queries. They know the sent of a DTH hammer and they can find the specific design quickly as well as quickly repair it.
Finally, repairing issues of your DTH hammer may appear to be tough, however with adequate information you can troubleshoot any challenges you might face. With a little knowledge on how your hammer works, common problems it may encounter, a guide for these problems, care for your hammer and knowing when to ask for help, you can ensure that your Kaiqiu DTH hammer works great, every time you use it.